| Quantity |
Code |
|
Description |
Price |
Unit |
Notes |
| | RFID Kits
| |
| 30 | | RFID Mk2 Starter Kit | £25.00 | 1 | "Refer TBs A39/1, A39/2" |
| 31 | | RFID Mk2 Reader PCB Kit (fits either ID12 or ID20 readers) | £2.00 | 1 | |
| 33a | | 8ch Mk2 RFID Concentrator - complete | £10.00 | 1 | |
| 33b | | RFID Concentrator Upgrade Pack - contains components to upgrade the Mk2 Starter kit to an 8ch Concentrator | £5.25 | 1 | Not suitable to upgrade the Mk1 RFID Starter Kit |
| | RFID Components
| |
| 32a |  | Pack of 5 12mm UNIQUE/EM4102 125kHz RFID ID Tags | £10.00 | 5-pack | |
| 32b | | Pack of 5 34mm UNIQUE/EM4102 125kHz RFID ID Tags | £12.50 | 5-pack | |
| 32c | | RFID Innovations ID12 RFID Reader (NOTE* PCB Kit 31 extra) | £15.00 | 1 | |
| 32d | | RFID Innovations ID20 RFID Reader (NOTE* PCB Kit 31 extra) | £24.00 | 1 | |
| | Superbloc Kits
| |
| 38 | | Superbloc BC3 Rev.5 Block Controller Kit, for automatic control of DC trains - Set up needs Kit 40 | £10.75 | 1 | Refer TB T33/11 - see 38M for 5 kit Multipack |
| 39A | | Superbloc BC3 Test Jig (revised) for testing completed BC3 controllers | £15.50 | 1 | Refer TB T33/12 |
| 40 | | Superbloc BC3 setting up kit, for setting BC3 parameters - includes test resistors | £2.00 | 1 | Refer TB T33/11 |
| | DCC Kits
| |
| 41 | | DCC Stand alone programmer, complete except mains cable | £45.00 | 1 | |
| 43 | | Handset for Mk1 DCC Command Station. (without cable, choose cable required below) - NOT SUITABLE FOR USE WITH CBUS kit 91 | £13.00 | 1 | Refer TB DCC11/03 |
| 44a | | DCC Handset cable, 1 metre - for use with Kit 43 ONLY | £0.60 | 1 metre | |
| 44b | | DCC Handset cable, 1.5 metres - for use with KIT 43 ONLY | £0.80 | 1.5 metres | |
| 44c | | DCC Handset cable, 2 metres - for use with Kit 43 ONLY | £1.00 | 2 metres | |
| 51 | | DCC Mimic Panel Accessory Encoder | £9.50 | 1 | Refer TB DCC11/12 |
| 52 | | DCC Accessory Decoder (pulse output for solenoid operated turnouts) | £11.50 | 1 | Refer TB DCC11/13 - see 52M for 5 kit Multipack |
| 53 | | DCC Accessory Decoder (steady output for constant drive turnouts, eg Tortoises) | £9.50 | 1 | Refer TB DCC11/14 |
| 54 | | Accessory Encoder CPU I/F, PC interface for kit 51 | £16.00 | 1 | |
| | | |
| 55 | | Steady State Accessory Decoder Enhancer (upgrades kit 53 for higher current motors eg. Fulgurex or Lemaco) | £4.00 | 1 | |
| 56 | | 8ch DCC only Current Transformer Block Detector, DTC-8 | £32.00 | 8 way kit | |
| 91 | | DCC Command Station with CBUS interface | £25.50 | 1 | New 2011 design needs one kit 92 or CAN-USB/JMRI |
| 92 | | Handset for DCC Command Station with CBUS Interface - MAX 2 PER ORDER PLEASE - NOT suitable for use with original BC1a Command Station kit 42 | £38.00 | 1 | New 2011 design - see kits 93 for CBUS network connector Kit |
| | General DC Kits
| |
| 36 | | SD2-4 Quad Colour Light Signal Driver - drives 2, 3 or 4 aspect signals *NOTE Signal not included | £8.00 | 4-pack | "Refer TBs S19/1, S19/2" |
| 37a | | PD3 Dual Capacitor-assisted Turnout Motor Driver with 1000uF capacitors | £5.50 | 1 | Refer TB T33/21 |
| 37b | | PD3-2200 Dual Capacitor-assisted Turnout Motor Driver with 2200uF capacitors | £5.75 | 1 | Refer TB T33/21 |
| 45 | | Automatic Train Controller (ATC) - Basic Shuttle Kit - OUT OF STOCK - £25.00 | | 1 | see kit 773 for suitable PSU |
| 46 | | Cab Select Relay Kit for ATC Expansion (CSR4) - NEW! | £18.50 | 1 | provides switching for multiple endpoints to Shuttle system |
| 61 | | Gas Lamp Twinkler, Includes a small PCB and all components to simulate flickering lamps. - OUT OF STOCK £3.00 | | 1 | Refer TBs A11/1 and A11/2 |
| 62 | | 4ch DC or DCC diode drop Block Detector (Train-on-Track-Indicator, ToTi-4) | £5.00 | 4-pack | Refer TB T21/5 |
| 63 | | 12ch DC or DCC diode drop Block Detector, (ToTi-12) | £14.50 | 12-pack | Refer TB T21/5 |
| 64 | | +/-5V Dual Power Supply Regulator kit for ToTIs | £5.00 | 1 | Refer TB T21/4 |
| | | |
| 65 | | Pair of 6vdc Plug-in Transformers for kit (64)(Wall warts) - Note: heavy item. | £5.00 | pair | |
| 66 | | DC Voltmeter and Ammeter kit | £6.50 | set | |
| 67 | | Memory Wire, Experimenter's kit by Jacques-le-Plat, will drive up to 4 turnouts | £19.00 | 1 pack | Refer TBs G19/1 and G19/2 |
| 71 | | Hornby ZERO-1 Keyboard refurbishment kit. | £8.70 | 1 | Refer TB CC1/23 |
| 72 | | Hector, Infra red train detector kit | £6.60 | 1 | |
| 73 | | Mk1 4ch Relay Driver Unit - 12v dc only, positive trigger | £9.00 | 1 | Refer TB G2/1 |
| 74 | | Mk2 4ch Relay Driver Unit - +12 to 24vdc, active-low inputs | £9.00 | 1 | |
| 75 | | Servo4, Drives 4 model aircraft servos for turnouts, level crossing gates, semaphore signals etc. | £5.50 | 1 | Refer TB A38/1 - see 75M for 5 kit Multipack |
| 76A | | ServoSet2, MK2 Setting box for kit 75, Servo4. | £17.50 | 1 | Refer TB A38/1 |
| | CBUS Kits
| |
| 80 | | USB Interface (CAN_USB) | £28.50 | 1 | |
| 81 | | RS232 Interface (CAN_RS) | £10.00 | 1 | Refer G32_5 |
| 82 | | Mimic Panel LED Driver (CAN_LED) | £15.00 | 1 | Refer G32_7 |
| 83 | | Mimic Panel Switch Interface (CAN_ACE3) | £12.00 | 1 | Refer G32_4 |
| 84 | | 4ch Pulse Motor Driver (CAN_ACC4) - OUT OF STOCK £16.50 | | 1 | Refer G32_2 - see 84M for 5-kit multipack |
| 85 | | 4/8ch Constant Motor Driver (CAN_ACC5) | £15.00 | 1 | Refer G32_3 |
| 88 | | 8ch Relay/Accessory Driver (CAN_ACC8) | £13.50 | 1 | Refer G32_1 |
| 89 | | 8ch Layout Feedback Interface (CAN_ACE8C) | £11.50 | 1 | Refer G32_6 |
| 90 | | CBUS Experimenter's Kit | £7.00 | 1 | |
| | | |
| 93H | | CBUS RJ22 Connector kit with horizontal socket (CAN-RJ22H) | £3.50 | 1 | New 2011 design |
| 93V | | CBUS RJ22 Connector kit with vertical socket (CAN-RJ22V) | £3.50 | 1 | New 2011 design |
| | Kit Multipacks
| |
| 38M | | SuperBlock BC3 - 5 kit Multipack - OUT OF STOCK £51.00 | | 5 pack | |
| 52M | | Pulse Accessory Decoder - 5 kit Multipack - OUT OF STOCK £55.00 | | 5 pack | |
| 75M | | Servo4 - 5 kit Multipack | £26.00 | 5 pack | |
| 84M | | CAN-ACC4 - 3 kit Multipack - OUT OF STOCK £47.00 | | 3 pack | |
| | Power Supplies
| |
| 771 | | 5V DC SMPS 2.5A (suitable for Servo4, RFID and CBUS) | £7.50 | 1 | Source your own std. Fig 8 mains power lead |
| 773 | | 15Vdc SMPS 3A (suitable for the ATC/Shuttle kits) - NEW | £11.00 | 1 | Source your own std. Fig 8 mains power lead |
| 774 | | 15Vdc SMPS 6A (suitable for the 5A DCC Booster) - COMING SOON | | 1 | |
| 776 | | 18V DC SMPS 3.6A (suitable for superBloc) | £13.50 | 1 | Source your own std. Fig 8 mains power lead |
| | Tools
| |
| 94 | | Bending Jig This simple tool makes bending leads of axial components simplicity itself | £1.00 | 1 | |
| 95 | | Track/PCB Cleaner block | £3.00 | 1 | |
| 96 | | Test Leads with Crocodile clips, pack of 10 coloured jumper leads. | £2.00 | pack of 10 | |
| | Relays and Switches
| |
| 97 | | Pack of 2 Magnetic Reed Relays with 4 reeds each | £1.50 | pack of 2 | refer TB A7/1 |
| 98 | | Relay 12V 2P c/o Varley - pack of 4 | £2.30 | pack of 4 | |
| 99 | | MicroSW Pack of 10 miniature LICOM microswitches - OUT OF STOCK £1.50 | | pack of 10 | |
| 721 | | BT 47W/6H PCB Relay (12v 960 ohms) | £0.80 | 1 | see 921 for pcb mounting board |
| 724 | | BT 47W/7H PCB Relay (24v 3840 ohms) - OUT OF STOCK £0.80 | | 1 | see 921 for pcb mounting board |
| 729 | | Dual Coil PCB Latching Relay (12v 720 ohms) - Hongfa HFD2/012-M-L2 www.jprelec.co.uk ref 820-232 | £1.20 | 1 | see 921 for pcb mounting board |
| 722 | | Miniature SPDT Toggle Switch, Ideal for mimic panels and the DCC accessory encoder | £0.40 | 1 | SPDT switch T-8014 in the attached data sheet |
| 101 | | Pack of 2 Magnetic Hall Effect Switches. | £1.00 | pack of 2 | refer TB A7/2 |
| 102 | | Pack of 5 Magnetic Hall Effect Switches. | £2.50 | pack of 5 | refer TB A7/2 |
| | | |
| 103 | | Pack of 11 Magnetic Hall Effect Switches. | £5.00 | pack of 11 | refer TB A7/2 |
| | Components
| |
| 104 | | Magnets - small cube - pack of 8 | £0.50 | 8 | |
| 105 | | Magnets - small cube - pack of 20 | £1.00 | 20 | |
| 106 | | Magnets - round, 12 mm - pack of 4 - OUT OF STOCK £0.50 | | 4 | |
| 107 | | Magnets - round, 12 mm - pack of 10 - OUT OF STOCK £1.00 | | 10 | |
| 108 | | Magnets - round, 8 mm - pack of 4 | £0.50 | 4 | |
| 109 | | Magnets - round, 8 mm - pack of 10 | £1.00 | 10 | |
| 113 | | LEDs - Golden white 3mm standard | £0.75 | 1 | |
| 116 | | LEDs - White Surface Mount - Pack of 1 | £2.30 | 1 | |
| 118 | | Filament Lamps, 1.4mm - axial leads - pack of 5 - REMAINING FEW WHILST STOCKS LAST | £1.75 | 5 | for lamps see the Conrad website |
| | | |
| 119 | | Filament Lamps, 0.7mm - radial leads - pack of 5 - DISCONTINUED | | 5 | for lamps see the Conrad website |
| 565 | | Coilcraft CS1200L 200 turn Current Transformer Coil - MAX 5 PER ORDER - OUT OF STOCK £1.50 | | 1 | as used in the DTC kit 56 |
| 701 | | TowerPro 9g SG90 Mini Servo with accessories - compatible with Kit 75 Servo4 driver - MAX 5 PER ORDER | £3.00 | 1 | Check out bulk deals for these servos on eBay |
| 763 | | Pre-cut Handset box for CAN-CAB Kit 92 | £6.50 | 1 | |
| 764 | | Label fascia for CAN-CAB Handset Kit 92 | £4.00 | 1 | |
| | Clothing
| |
| 22S | | MERG Polo Shirt (Short-sleeved with MERG logo), Black 65% polyester / 35% cotton size S | £11.00 | 1 | |
| 22M | | MERG Polo Shirt (Short-sleeved with MERG logo), Black 65% polyester / 35% cotton size M | £11.00 | 1 | |
| 22L | | MERG Polo Shirt (Short-sleeved with MERG logo), Black 65% polyester / 35% cotton size L | £11.00 | 1 | |
| 22XL | | MERG Polo Shirt (Short-sleeved with MERG logo), Black 65% polyester / 35% cotton size XL | £11.00 | 1 | |
| 22XXL | | MERG Polo Shirt (Short-sleeved with MERG logo), Black 65% polyester / 35% cotton size XXL | £11.00 | 1 | |
| 23 | | MERG Baseball Cap (Black with MERG Logo) - DISCONTINUED | | 1 | |
| 24S | | MERG Sports Shirt (Long-sleeved with MERG logo), Black 65% polyester / 35% cotton size S | £12.00 | 1 | |
| 24M | | MERG Sports Shirt (Long-sleeved with MERG logo), Black 65% polyester / 35% cotton size M | £12.00 | 1 | |
| 24L | | MERG Sports Shirt (Long-sleeved with MERG logo), Black 65% polyester / 35% cotton size L | £12.00 | 1 | |
| | | |
| 24XL | | MERG Sports Shirt (Long-sleeved with MERG logo), Black 65% polyester / 35% cotton size XL | £12.00 | 1 | |
| 24XXL | | MERG Sports Shirt (Long-sleeved with MERG logo), Black 65% polyester / 35% cotton size XXL | £12.00 | 1 | |
| 25M | | MERG Fleece (Long-sleeved with MERG logo), Black 100% Polyester size M | £24.00 | 1 | |
| 25L | | MERG Fleece (Long-sleeved with MERG logo), Black 100% Polyester size L | £24.00 | 1 | |
| 25XL | | MERG Fleece (Long-sleeved with MERG logo), Black 100% Polyester size XL | £24.00 | 1 | |
| 25XXL | | MERG Fleece (Long-sleeved with MERG logo), Black 100% Polyester size XXL | £24.00 | 1 | |
| | Integrated Circuits
| |
| 501 | | LM317T Integrated circuit | £0.25 | 1 | |
| 503 | | LM324 Integrated circuit | £0.14 | 1 | |
| 504 | | HFC4051B Integrated circuit | £0.26 | 1 | |
| 540 | | 16F628A PIC (Blank Programmable Microcontroller as used in DCC and RFID kits) | £1.10 | 1 | |
| 540P | | Programmed PIC16F628A Microcontroller - please state firmware required (DCC ACE3, ACC4, ACC5, RFID1.1, custom) | £2.00 | 1 | |
| 751 | | 16F630 PIC (Blank Programmable Microcontroller) | £1.10 | 1 | |
| 751P | | Programmed PIC16F630 Microcontroller - please state firmware required (SERVO4f, SEMA4, custom) | £2.00 | 1 | |
| 752 | | 16F676 PIC (Blank Programmable Microcontroller as used in the Servoset kit 76) | £1.50 | 1 | |
| 752P | | Programmed PIC16F676 Microcontroller - please state firmware required (Servoset SSET2A, custom) | £2.00 | 1 | |
| | | |
| 532 | | 18F4220 PIC (Blank Programmable Microcontroller) | £4.50 | 1 | |
| 754 | | 18F2480 PIC (Blank Programmable Microcontroller as used in CBUS kits) - MAX 10 PER ORDER | £3.50 | 1 | |
| 754P | | Programmed PIC18F2480 Microcontroller - please state firmware required (CBUS USB, RS, ACC4, ACC5, ACC8, ACE8C, ACE3, LED, CMD, custom) | £4.50 | 1 | |
| 754SMP | | Pre-Programmed SM PIC18F2480-I/SO for CAN-CAB Module | £4.00 | 1 | Surface mount component |
| 755 | | MCP2551 CAN Transceiver as used in CBUS - MAX 10 PER ORDER | £0.65 | 1 | |
| 755SM | | SM MCP2551 CAN Transceiver for CAN-CAB Module | £0.70 | 1 | Surface mount component |
| 761 | | 18F2420 PIC (Blank Programmable MicroController as used in Stepper Motor Turntable Controller) | £5.00 | 1 | |
| 761P | | Programmed PIC18F2420 Microcontroller for Stepper Motor Turntable Controller (firmware TTC2420 v12) | £5.50 | 1 | see kit 997 for pcb |
| 531 | | FQP27P06 P-channel MOSFET | £0.75 | 1 | |
| 539 | | STP16CL596B1R LED Driver as used in CBUS CAN_LED module | £1.20 | 1 | |
| | | |
| 757 | | SN754410 H-Bridge Output Driver as used in CBUS CAN_ACC5 module | £0.70 | 1 | |
| 759 | | HIN232IPZ RS232 Line Driver as used in RFID Kits and CAN_RS | £0.60 | 1 | |
| 762 | | L6384E Half Bridge Driver as used in NB1B DCC Booster | £1.20 | 1 | |
| 517 | | KB814 Single Opto-Isolator (alternative to the TLP521-1 as used in the ToTI kits) | £0.12 | 1 | The TLP 521 range is now obsolete |
| 518 | | KB824 Dual Opto-Isolator (2 x KB814 in a single package) - may be supplied as TLP521-2 until stocks exhausted | £0.30 | 1 | The TLP 521 range is now obsolete |
| 519 | | KB844 Quad Opto-Isolator (quad version of KB814 above) - may be supplied as TLP521-4 until stocks exhausted | £0.70 | 1 | The TLP 521 range is now obsolete |
| | Transistors
| |
| 758 | | FDV304P SMD CBUS Transistors in a 4-pack | £0.36 | Pack of 4 | |
| 511 | | Transistor BC547B | £0.02 | 1 | |
| 512 | | Transistor BC557B | £0.02 | 1 | |
| 514 | | Transistor BC184 | £0.03 | 1 | |
| | Capacitors
| |
| 560 | | Capacitor 100nF/63v min polyester. | £0.06 | 1 | |
| 363 | | 1000uF/63V Electrolytic Capacitor, for use with PD3-1000 kit | £0.20 | 1 | |
| 563 | | 2200uF/35v Electrolytic Capacitor, for use with PD3-2000 kit | £0.45 | 1 | |
| | Diodes
| |
| 521 | | Diode - 1N4148 | £0.01 | 1 | |
| 522A | | Diode - 1N4002 | £0.04 | 1 | |
| 523 | | Diode - 1N5401 | £0.08 | 1 | |
| 524 | | Schottky Diode - 1N5819 | £0.08 | 1 | |
| 526 | | Schottky Diode - SB140 | £0.10 | 1 | |
| 530 | | Bridge rectifier WOO5, 1.5A 50V | £0.11 | 1 | |
| | Plugs and Sockets
| |
| 552 | | 2-way 5mm PCB Terminal Block - Camden CTB5200-type | £0.16 | 1 | modular - combine with 553 for any no. of ways |
| 553 | | 3-way 5mm PCB Terminal Block - Camden CTB5200-type | £0.20 | 1 | modular - combine with 552 for any no. of ways |
| 558 | | 2-way 3.5mm PCB Terminal1 Block - Camden CTB0305/2 type as used in the CAN-RJ22 kit 93H and V | £0.30 | 1 | |
| 6608 | | 8 way 7.62mm (0.3" ) DIL IC socket | £0.04 | 1 | |
| 6614 | | 14 way 7.62mm (0.3" ) DIL IC socket | £0.05 | 1 | |
| 6616 | | 16 way 7.62mm (0.3" ) DIL IC socket | £0.06 | 1 | |
| 6618 | | 18 way 7.62mm (0.3" ) DIL IC socket | £0.06 | 1 | |
| 6628 | | 28 way 7.62mm (0.3" ) DIL IC socket | £0.11 | 1 | |
| 680 | | 2 way Molex-type housing (to make up crimp sockets) | £0.02 | 1 | |
| | | |
| 681 | | 2 way pcb Molex-type header plugs | £0.06 | 1 | |
| 682 | | 5 way Molex-type housing, (to make up crimp sockets) | £0.07 | 1 | |
| 683 | | 5 way pcb Molex-type header plugs | £0.12 | 1 | |
| 684 | | 10 way Molex-type housing, (to make up crimp sockets) | £0.15 | 1 | |
| 685 | | 10 way straight pin Molex-type header | £0.26 | 1 | |
| 686 | | 15 way Molex-type housing, (to make up crimp sockets) | £0.14 | 1 | |
| 687 | | 15 way straight pin Molex-type header | £0.30 | 1 | |
| 689 | | Molex type crimp terminals for use with housings | £0.02 | 1 | |
| 694 | | 2.54mm (0.1" ) Jumper link | £0.04 | 1 | |
| 695 | | 36 way 2.54mm (0.1" ) single row header | £0.15 | 1 | |
| | | |
| 720 | | Terminal blocks 12 way. | £0.40 | 1 | |
| | Kit Printed Circuit Boards
| |
| 920 | | U-PSU Universal Regulated Power Supply PCB | £1.00 | 1 | |
| 921 | | U-RLY Universal Relay Mounting PCB | £1.50 | 1 | Suitable for 300 mil BT47 and Latching Relays |
| 931 | | RFID Reader PCB | £1.00 | 1 | Suitable for both ID12 and ID20 RFID Readers |
| 930 | | RFID Starter Kit/Concentrator PCB | £1.75 | 1 | Starter Kit upgrades to a Concentrator |
| 936 | | SD2 Signal Driver PCB | £1.10 | 1 | |
| 937 | | PD3 Point Driver PCB | £1.50 | 1 | |
| 938 | | superBloc BC3 PCB | £3.00 | 1 | |
| 951 | | DCC Accessory Encoder PCB | £2.00 | 1 | |
| 952 | | DCC Accessory Decoder (P) PCB | £2.50 | 1 | |
| | | |
| 953 | | DCC Accessory Decoder (S/S) PCB | £2.15 | 1 | |
| 956 | | DTC - DCC Block Detector PCB | £2.00 | 1 | |
| 961 | | Gas Lamp Twinkler PCB - OUT OF STOCK | | 1 | usually £1.00 |
| 962 | | ToTI-4 PCB | £1.70 | 1 | |
| 963 | | ToTI-12 PCB | £4.40 | 1 | |
| 973 | | Mk1 4 ch Relay unit PCB | £4.25 | 1 | |
| 974 | | Mk2 4ch Relay Unit RLY2 PCB | £1.60 | 1 | |
| 975 | | Servo4-F PCB - updated design 2011 | £1.50 | 1 | |
| 997 | | Stepper Motor Turntable Controller PCB | £3.00 | 1 | see kit 761 for programmed PIC |
| | CBUS Printed Circuit Boards
| |
| 980 | | CAN_USB USB I/F PCB (Mike Bolton's Design) | £1.75 | 1 | |
| 981 | | CAN_RS RS232 I/F PCB | £3.00 | 1 | |
| 982 | | CAN_LED Panel LED Driver PCB | £2.00 | 1 | see also PCB for TM4 test module - kit 901 |
| 983 | | CAN_ACE3 Panel Sw I/F PCB | £2.00 | 1 | |
| 984 | | CAN_ACC4 Twin Coil Driver PCB | £2.50 | 1 | |
| 985 | | CAN_ACC5 Steady State Driver PCB | £2.25 | 1 | |
| 987 | | CAN_SERVO8 8ch Servo Driver PCB - NEW | £2.25 | 1 | |
| 988 | | CAN_ACC8 Relay/LED Driver PCB | £1.75 | 1 | |
| 989 | | CAN_ACE8C ToTI/Interlock I/F PCB | £1.75 | 1 | |
| | | |
| 991 | | CAN_CMD CBUS DCC Command Station PCB rev A - NEW layout as used in kit 91 - supersedes prototype revC available in MERG resources | £2.50 | 1 | |
| 992 | | CAN_CAB CBUS DCC Handset PCB - NEW -For use with 991 new DCC Command Stn. NOT suitable for use with MERG original BC1a Command Station kit 42 | £2.75 | 1 | |
| 993 | | CAN_RJ22 Connector Kit PCB | £1.50 | 1 | |
| 901 | | TM4 CAN-LED Test Module PCB - as featured in Summer 2011 Journal | £3.00 | 1 | |
| | Special Offers
| |
| 702 | | Contronics Capacitor Discharge Unit | £3.00 | 1 | SPECIAL OFFER - while stocks last only |
| 703 | | Contronics Dual 16Vac Mains PSU with overload protection - 2 outputs at 2A each - £15.00ea - Heavy Item only available for collection at MERG Keen House meetings | | 1 | SPECIAL OFFER - while stocks last only |
| 996 | | DB9S 2m Null Modem Cable | £2.00 | 1 | SPECIAL OFFER - while stocks last only |